Since I had
rebuild the rear suspension with a mid-leaf spring kit, the front of the car has sat higher than the rear. I also upgraded the rear to 15" wheels, but due to how much it costs, I couldn't do the front wheels at the same time. Finally, this spring I was able to get the front wheels and also ended up cutting the front springs to address the stance of the car. I went with P225/60R15 tires for the front.
 |
| 15" wheels all around, but the stance is too high in the front |
 |
| Pulled the springs |
 |
| I ended up cutting 1/2 a coil to lower |
 |
| That finally brought the front down and now the car sits level and low. |
No comments:
Post a Comment